Table of Contents
Advertisement
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Mapping Ports to Packet Priorities
The 802.1P Default Priority Page provides traffic classification. by assigning priority values per port. The priority value is
assigned when packet arrives to a port with an empty priority tag.
1. Click Qos > 802.1p Default Priority. The 802.1P Default Priority Page opens:
The 802.1P Default Priority Page contains the following fields:
Field
Unit
From Port
To Port
Priority
2. Define the Unit, From Port, To Port, Prioirity fields.
3. Click
115
Figure 4-4. 802.1P Default Priority Page
Description
Defines the stacking member for which the port packet priorities are displayed.
Defines the starting port for which the port packet priorities are defined.
Defines the ending port to which the port packet priorities are defined.
Defines the priority assigned to the port. The field range is 00-07, where 00 is the lowest
priority and 07 is the highest priority.
. Ports are mapped to packet priorities, and the device is updated.
Advertisement
Table of Contents
