Table of Contents
Advertisement
Field
Priority
Status
Role
2. Define the values in the Unit and Port fields.
3. Click
4. Define the Internal Path Cost and Priority fields.
5. Click
6. Click
Description
200,000,000. The default value is automatically set cost, according to its speed. Default port
cost: 10Mbps port = 2000000, 100Mbps port = 200000. Gigabit port = 20000, Port-channel =
20000.
Defines the interface priority for the specified instance. The default value is 128.
Indicates whether the port is enabled for the specific instance. The possible field values are:
Forwarding — Enables the port for the specific instance.
Listening - Processes BPDUs received from the system module
Learning – Incorporates station location into its address database
Blocking - Discards frames received from the attached segment and frames switched from
another port for forwarding
Disabled — Disables the port for the specific instance.
Indicates the port role assigned by the STP algorithm to provide to STP paths. The possible
field values are:
Enabled — Enables the port for the specific instance.
Root — Provides the lowest cost path to forward packets to the root device.
Designated — Indicates the port or LAG through which the designated device is attached
to the LAN.
Alternate — Provides an alternate path to the root device from the root interface.
Backup — Provides a backup path to the designated port path toward the Spanning Tree
leaves. Backup ports occur only when two ports are connected in a loop by a point-to-point
link or when a LAN has two or more connections connected to a shared segment.
Disabled — Indicates the port is not participating in the Spanning Tree.
.
.
adjacent to an MSTI ID row to edit the values for Internal Path Cost and Priority.
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
92
Advertisement
Table of Contents
