Defining Lldp Basic Tlv Settings - D-Link 3100 24P - DGS Switch - Stackable User Manual

Defining LLDP Basic TLV Settings

The LLDP Basic TLVS Setting Page displays LLDP basic TLV port information and contains parameters for configuring
LLDP basic TLV port settings.
1. Click L2 Features > LLDP > LLDP Basic TLVS Setting. The LLDP Basic TLVS Setting Page opens:
The LLDP Basic TLVS Setting Page contains the following fields:
Field
Unit
From Port
To Port
Port Description
System Name
System Description
System Capabilities
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Figure 3–18. LLDP Basic TLVS Setting Page
Description
Indicates the stacking member for which the LLDP basic TLV port settings are
defined.
Defines the first port in a consecutive sequence of ports.
Defines last port in a consecutive sequence of ports.
Specifies whether the Port Description TLV is enabled on the port. The possible
field values are:
Enabled — Enables the Port Description TLV on the port.
Disabled — Disables the Port Description TLV on the port.
Specifies whether the System Name TLV is enabled on the port. The possible field
values are:
Enabled — Enables the System Name TLV on the port.
Disabled — Disables the System Name TLV on the port.
Specifies whether the System Description TLV is enabled on the port. The possible
field values are:
Enabled — Enables the System Description TLV on the port.
Disabled — Disables the System Description TLV on the port.
Specifies whether the System Capabilities TLV is enabled on the port. The possible
field values are:
100