Table of Contents
Advertisement
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
The ACL Profile L2 ACL Tagged MAC Address Page contains the following fields:
Field
Source MAC Mask
Destination MAC Mask
2. Select Source MAC Mask and/or Destination MAC Mask. The Mask Generate button is active.
3. Enter a MAC mask in the box adjacent to the Mask Generate button.
Alternatively, click
Enter a MAC address range into the Generate Mask by range fields, and click
generated.
4. Click
To define L2 802.1Q VLAN ACL profile:
1. Click the 802.1Q VLAN button. The ACL Profile L2 ACL Tagged VLAN Page updates to show the following:
The ACL Profile L2 ACL Tagged VLAN Page contains the following fields:
Field
802.1p
VLAN VID
2. Define the 802.1p and VLAN VID fields.
3. Click
To define L2 Ether Type ACL profile
This option defines whether or not the Ether Type field is checked for a match.
1. Click the Ether Type button. The ACL Profile L2 ACL Tagged Ether Type Page updates to show the following:
177
Description
Defines the range of source addresses relative to the ACL rules (0=ignore, 1=check).
For example, to set 00:00:00:00:10:XX, use mask FF:FF:FF:FF:FF:00.
Defines the range of destination addresses relative to the ACL rules (0=ignore,
1=check).
For example, to set 00:00:00:00:10:XX, use mask FF:FF:FF:FF:FF:00.
. The ACL profile is added, and the device is updated.
Figure 8-6 ACL Profile L2 ACL Tagged VLAN Page
Description
Sets the 802.1p field as an essential field to match.
Sets the VLAN VID field as an essential field to match.
. The ACL profile is added, and the device is updated.
. The Generate Mask by range fields appear.
. The mask is
Advertisement
Table of Contents
