Linking Trays; Single Sheet Feeder - Dell 2130cn - Color Laser Printer User Manual

Monarch or DL
The Monarch or DL envelopes can be loaded in one of the following ways:
Load the envelopes short edge feed with the flaps closed and the print side up. Ensure that the flaps come at the right when you face towards the printer.
OR
Load the envelopes long edge feed (LEF) with the flaps open and the print side up. Ensure that the flaps come at the top when you face towards the printer.
C5
Load the envelopes short edge feed with the flaps closed and the print side up. Ensure that the flaps come at the bottom when you face towards the printer.

Linking Trays

Tray linking allows you to load the same size and type of print media in the standard 250-sheet tray and optional 250-sheet feeder. The printer automatically
links the trays and will use the first tray until it runs out of media, then switch to the linked tray.
If you load the same size print media in each tray, ensure that the type of media is same.
When the selected trays are loaded with the same size and type of print media, select the Paper Type settings in the Tray Settings for each source.
To disable tray linking, set the Paper Type to a unique value in each one of the trays. If all trays do not have the same type of print media when linked, you
could mistakenly print a job on the wrong paper type.
NOTE: If the paper type is not specified in the printer driver, the printer automatically links the trays (even if there are different types of print media
loaded in them).
Single Sheet Feeder
Capacity
The single sheet feeder can hold:
1 sheet of the standard paper.
l
Print Media Dimensions
The single sheet feeder accepts print media within the following dimensions: