Before Installation - Dell 2130cn - Color Laser Printer User Manual

To set up e-mail alerts:
1. Launch the Dell Printer Configuration Web Tool.
2. Click E-Mail Alert link.
3. Under Setup E-Mail Lists and Alerts, enter the Primary SMTP Gateway, the Reply Address, and enter your email address or the key operator's email
address in the email list box.
4. Click Apply New Settings.
NOTE: The SMTP server will display Connection in Progress until an error occurs.
Remote Network Printer Setup

Before Installation

Before you start remote installation, perform the following procedures.
Allow Print Spooler to Accept Client Connections
NOTE: This step is required for Windows Vista, Windows Vista 64-bit Edition, Windows XP 64-bit Edition, Windows Server 2003, Windows Server 2003
64-bit Edition, Windows Server 2008, and Windows Server 2008 64-bit Edition.
1. Click start® All Programs (for Windows Vista only)® Accessories (for Windows Vista only)® Run.
2. Type gpedit.msc, and then click OK.
3. Click Computer Configuration® Administrative Templates® Printers.
4. Right-click Allow Print Spooler to accept client connections and select Properties.
5. From the Setting tab, select Enabled, and then click OK.
6. Restart the computer.
Share the Firewall File and Printer
NOTE: This step is required for Windows Vista, Windows Vista 64-bit Edition, Windows XP 64-bit Edition, Windows XP 32-bit Edition, Windows Server
2008, and Windows Server 2008 64-bit Edition.
For Windows Vista:
1. Click Start® Control Panel.
2. Select Security.
3. Click Windows Firewall.
4. Click Change settings.
5. Click Continue.
6. From the Exceptions tab, check the File and Printer Sharing check box, and then click OK.
For Windows Server 2008:
1. Click Start® Control Panel.
2. Double-Click Windows Firewall.