Dell 2130cn - Color Laser Printer User Manual page 30

To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values.
NOTE: This item is only displayed when an optional wireless printer adapter is installed.
TCP/IP
Purpose:
To configure TCP/IP settings. Any changes made become effective after the printer is turned off and then on.
Values:
Dual Stack*
IP Mode
IPv4 Mode
IPv6 Mode
AutoIP* Automatically sets the IP address.
BOOTP
Get IP Address RARP
DHCP
IPv4
Panel
IP Address
Subnet Mask
Gateway Address
1
IPsec*
1
* Only displayed when an optional network protocol adapter is installed and IPsec is enabled.
Protocol
Purpose:
To enable or disable each protocol. Any changes made become effective after the printer is turned off and then on.
Values:
Enable* Enables the LPD port.
LPD
Disable
Enable* Enables the Port9100 port.
Port9100
Disable
Enable* Uses IP for NetWare.
1
NetWare IP
NetWare*
Disable
Enable* Enables the WSD port.
1
WSD*
Disable
Enable* Enables the UDP.
SNMP SNMP UDP
Disable
Enable* Enables the Email Alerts feature.
E-Mail Alert
Disable
Enable* Enables an access to Dell Printer Configuration Web Tool embedded in the printer.
EWS
Disable
Enable* Enable the HTTP-SSL/TLS.
2
HTTP-SSL/TLS*
Disable
1
* Only displayed when an optional network protocol adapter is installed.
2
* Only displayed when an optional network protocol adapter is installed and which is authenticated by EWS.
IP Filter
Purpose:
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Uses IPv6 to set the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Uses DHCP to set the IP address.
Enables the IP address entered on the operator panel.
Sets the IP address allocated to the printer by using the keys on the operator panel.
Sets the subnet mask.
Sets the gateway address.
Disables IPsec.
Disables the LPD port.
Disables the Port9100 port.
Does not use IP for NetWare.
Disables the WSD port.
Disables the UDP.
Disables the Email Alerts feature.
Disables an access to Dell Printer Configuration Web Tool embedded in the printer.
Disable the HTTP-SSL/TLS.