Network Settings - Dell 2130cn - Color Laser Printer User Manual

Letter (8.5 x 11")
2
Tray 2 Paper Size*
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x
10.5")
Off
Display Popup
On*
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply
Press the Restart printer to apply new settings button to apply the changes.
new settings
1
* "S2" means the print side 2 of the paper.
2
* This item is only available when the optional 250-sheet feeder is installed.
TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:
AutoIP*
IP Address
DHCP
Mode
BOOTP
RARP
Manually Set
1
IP Address*
2
Subnet Mask*
1
Gateway Address*
Apply New Settings
Restart printer to apply new
settings
1
* 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address.
2
* 255.255.255.255 cannot be specified as the subnet mask.

Network Settings

Purpose:
To display the server settings of the Dell Printer Configuration Web Tool.
NOTE: When the printer is connected to the local port, this setting cannot be displayed.
Values:
Display Displays the server settings of the Dell Printer Configuration Web Tool.
Off Disable to display the server settings of the Dell Printer Configuration Web Tool.
Display of EWS
On* Enable to display the server settings of the Dell Printer Configuration Web Tool.
Diagnosis
Specifies the size of paper loaded in the optional 250-sheet feeder.
Does not display a popup message that prompts to set paper size and type when paper is loaded in the
standard 250-sheet tray and optional 250-sheet feeder.
Displays a popup message that prompts to set paper size and type when paper is loaded in the
standard 250-sheet tray and optional 250-sheet feeder.
Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the network is set as the IP
address. The subnet mask is set as 255.255.0.0.
Sets the IP address using DHCP.
Sets the IP address using BOOTP.
Sets the IP address using RARP.
Manually sets the IP address.
Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 254.
Manually sets the subnet mask.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
255.
Manually sets the gateway address.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254.
After you complete the settings, press the Apply New Settings button to apply the changes.
Press the Restart printer to apply new settings button to apply the changes.