Environment Sensor Info; Developer Stir Mode; Refresh Mode - Dell 2130cn - Color Laser Printer User Manual

Folio (8.5 x 13")
Legal (8.5 x 14")
Paper Size Executive (7.25 x 10.5")
Monarch (3.875 x 7.5")
Monarch LEF (7.5 x 3.875")
DL (110 x 220 mm)
DL LEF (220 x 110 mm)
C5 (162 x 229 mm)
Envelope #10 (4.125 x 9.5")
Plain*
Plain Thick
Covers
Paper Type Covers Thick
Label
Recycled
Envelope
Off*
Rear side
On
Color*
Color Mode
Black
Start

Environment Sensor Info

Purpose:
To output the printer's internal environment sensor information to Result by pressing the Get Environment Sensor Info button.

Developer Stir Mode

Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Values:
Developer Stir Mode Click Start to stir the toner.

Refresh Mode

Purpose:
To use up a toner cartridge or PHD unit when you need to replace it before the end of its life, or to stir the toner in a new toner cartridge.
CAUTION: Using the Refresh Mode consumes extra toner.
Values:
Yellow
Magenta Click Magenta to clean the magenta cartridge.
Toner Refresh Mode
Cyan
Black
PHD Refresh Mode PHD
Back to Contents Page
Specifies the size of paper to be used by the Paper Wrinkle Check Mode.
Specifies the type of paper to be used by the Paper Wrinkle Check Mode.
Does not use the Print side 2 of the paper.
Uses the Print side 2 of the paper.
Prints in color mode.
Prints in monochrome mode.
Click this button to print in the specified paper size, type, and color mode.
Click Yellow to clean the yellow cartridge.
Click Cyan to clean the cyan cartridge.
Click Black to clean the black cartridge.
Click PHD to clean the PHD unit.