2. Press Software Installation to launch the installation software.
3. Select Network Installation, and then click Next.
4. Select Remote Installation, and then click Next.
a. Enter the computer name, user ID, and password. Then, click Add.
b. Click Next.
In some cases, Windows Security Alert is displayed in this step when you use Windows Vista, Windows Vista 64-bit Edition, Windows
Server 2008, or Windows Server 2008 64-bit Edition. In this case, select Unblock, and then continue the procedure.
5. Select the printer you want to install from the printer list, and then click Next. If the target printer is not displayed on the list, click Refresh to refresh the
list or click Add Printer to add a printer to the list manually. You may specify the IP address and port name at this point.
When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a valid IP address.
6. Specify the printer settings, and then click Next.
a. Enter the printer name.
b. If you want other users on the network to access this printer, select Share this printer with other computers on the network, and then enter a
share name that users will easily identify.
c. If you want to set a printer as the default, select the Set this printer as default check box.
d. If you want to restrict color printing, select the appropriate Dell ColorTrack option. Enter the password when Color-Password Enabled is
selected for Dell ColorTrack.
7. Select the software and documentation you want to install, and then click Next. You can specify folders in which to install the Dell software and
documentation. To change the folders, click Input.
8. Click Finish to exit the wizard when the Congratulations! screen appears.
Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your desk. You can view and/or change the printer
configuration settings, monitor toner level, and when it is time to order replacement consumables, just click the Dell supplies link right from your Web browser.
The Dell Printer Configuration Web Tool is not available when the printer is locally attached to a computer or a print server.
To launch the Dell Printer Configuration Web Tool, type the printer's IP address in your Web browser, and the printer configuration appears on the screen.
You can set up the Dell Printer Configuration Web Tool to send you an email when the printer needs supplies or intervention.
To set up e-mail alerts:
1. Launch the Dell Printer Configuration Web Tool.
2. Click E-Mail Alert link.
3. Under E-Mail Server Settings, enter the Primary SMTP Gateway, the Reply Address, and enter your email address or the key operator's email
address in the email list box.
4. Click Apply New Settings.
The SMTP server will display Connection pending until printer sends an alert until an error occurs.
1. Press Menu button.
button until Admin Menu appears, and then press
button until Panel Settings appears, and then press
4. Panel Lock is displayed. Press
button until Enable appears, and then press
6. Press Cancel button to return to the previous menu.