Event Management Configuration - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Chapter 6

6. Event Management Configuration

Integrated RA provides a menu of server events that Integrated RA can monitor
and manage if you so choose.
NOTE
The event management settings listed below can also be
configured by running the Integrated RA Configuration Utility
at the server on which Integrated RA is incorporated. For more
information on using the Integrated RA Configuration Utility,
see Chapter 3.
When you choose Event Management Configuration from the Main Menu,
Integrated RA displays the Event Management Menu.
EVENT MANAGEMENT CONFIGURATION MENU
Paging Threshold
------------------- --------------------------------------
(a) Warning
(b) Warning
(c) Warning
(d) Critical
(e) All
(f) Critical
(g) All
(h) Warning
(j) None
(k) Critical
(m) Warning
(n) None
(p) [ ] Power off on Critical Temperature
(q) [ ] Power off on Critical Voltage
Select item to toggle, or (!) for factory defaults, or (0)Main Menu:
Figure 6-6. Integrated RA Event Management Configuration Menu
To change the action for an event, type the letter of the item. Each time you type
the letter you will see the next available pager threshold selection for that event.
You may also set your server to power off for temperature and over voltage
conditions. More details on setting paging events may be found in Chapter 3.
NOTE Settings in the Event Management menu do not control the
generation of SNMP alarms.
66
Using Integrated RA to Manage Server Operations
Event Category
System Power
Temperature Sensors
Fans
Memory Errors
Critical Hardware Errors
System Hang (ASR)
POST Errors
Security
System Status
Disk Drives & Controllers
Network Interface Controllers
Other