Installing Pcanywhere On The Server; Installing Pcanywhere - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Chapter 4

Installing pcAnywhere on the Server

For Microsoft Windows NT and 2000, to allow for console redirection (the ability
to redirect what's graphically displayed on your server) over the modem, you must
install the host software, included with your system, on your server.
NOTE Remember that Integrated RA's software license authorizes a
single administrator for each copy of software (including
Symantec's ).
Console Redirection Over a LAN
If you want Console Redirection (remote control) of your server over a LAN
(instead of using a modem with ) you must have TCP/IP Services installed on your
server. TCP/IP is available with the standard Windows NT and 2000 product. For
instructions, refer to the online pcAnywhere User Guide (see the "Documentation"
section of Chapter 2 for details).

Installing pcAnywhere

To install the pcAnywhere software at your Windows NT or 2000 server:
1. Log into Windows with administrator privileges. You need to be the system
administrator, or have an account that belongs to the administrator group.
2. Insert the HP NetServer Navigator into the CD-ROM drive.
3. Choose Run from the Start menu in Windows and type the following path
to run the setup program:
x:\util\pca32\us\disk1\setup.exe
where x: is the driver letter of your CD-ROM drive. Follow the instructions
on the screen.
4. Go to \UTIL\PCA32\US\HPEXTN directory on the Navigator CD and
double click on the file "HPPCA.REG". This will create three new registry
entries under the OnlineService Key under
pcANYWHERE\CurrentVersion.
5. Copy the following file from the HP NetServer Navigator CD:
File to copy from the Navigator CD:
\UTIL\PCA32\US\HPEXTN\raserver.bhf
42
Setting Up Console Redirection on MS Windows NT Servers