Management Processor (Mp) Event Logs - HP Integrity RX4640 Operation Manual

Troubleshooting
Troubleshooting Using Offline Support Tools
******
******
****** HP shall not be liable for any damages resulting from the
****** use of this program.
******
****** TC
****** SysLib Version B.00.06
****** Mapfile Version B.01.05
******
***************************************************************************
Type HELP for command information.
ODE> ls
Modules on this boot media are:
filename type size
-----------------------------------------------------------------------------
CIODIAG2.EFI TM 642560
CPUDIAG.EFI TM 737280
IODIAG.EFI TM 143872
MAPPER.EFI TM 1653248
MEMDIAG.EFI TM 263168
PERFVER.EFI TM 814592
PLUTODIAG.EFI TM 514560
COPYUTIL.EFI TM 1041920
DFDUTIL.EFI TM 850432
FCFUPDATE.EFI TM 608256
ODE>

Management Processor (MP) Event Logs

The MP interface provides diagnostic and configuration capabilities. To access your MP interface, perform the
following steps:
NOTE The MP interface must be accessed from a terminal console that is attached to the MP via the
MP LAN or MP remote serial connector.
Step 1. If necessary, press
Step 2. Log in with proper user name and password.
82
All Rights Reserved
Version B.00.10
created description
06/06/2003 Core IO diagnostic
06/06/2003 Processor diagnostic
06/06/2003 Runs selftests on I/O modules
06/06/2003 System mapping utility
06/06/2003 Memory diagnostic
06/06/2003 Runs ROM-based selftests on peripherals
06/06/2003 SBA/LBA diagnostic
06/06/2003 Disk-to-tape copy utility
06/06/2003 Disk firmware download utility
06/06/2003 FW Update Utility for Fibre Channel
to access the MP interface.
CTRL+B
******
******
******
******
******
******
******
******
******
Chapter 5