Remote Client Installation Requirements - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Chapter 2

Remote Client Installation Requirements

For the remote client, you can use any ANSI X3.64 compatible terminal or
terminal emulator with a modem or RS-232 connection. For best results, use an
ANSI color terminal that supports 25-line mode and IBM PC character set, the
configuration supported by the pcAnywhere terminal software. Remote client
requirements for pcAnywhere include:
A 486-based (or faster) computer with 16 MB of available disk space
A communications link to the server, either through a modem or a direct
serial connection
MS Windows 95, 98, 2000, or Windows NT Workstation 4.0
Remote Administration Using the HP Integrated Remote Assistant
11