Setting Up The Remote Client; Setting Up Terminal Emulation - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

5 Setting Up the Remote Client

This chapter describes how to set up a remote client to communicate with the
Integrated RA accessory integrated into your HP NetServer. Installing the remote
client software is the second part of the installation process.
After you have set up your remote management client, you can begin managing
your server as described in Chapter 6.

Setting Up Terminal Emulation

Before you begin remote management of servers using Integrated RA, you need to
set up terminal emulation at both the remote client and at the server. Two setup
options for remote terminal emulation are described below:
Option 1: Managing a server remotely using pcAnywhere
Option 2: Managing a server using a dedicated terminal, or other terminal
emulation package
Choose the setup option that best suits your needs.
47