Exit; Installing Or Updating A Utility Partition - HP LC2000r - NetServer - 128 MB RAM Administrator's Manual

Hp netserver remote administrator guide
Hide thumbs Also See for LC2000r - NetServer - 128 MB RAM:
Table of Contents

Advertisement

Chapter 3
Figure 3-17. Version Information Window
The Version Information window displays information that the Configuration
Utility found after checking the installation. Display fields include:
Integrated RA Software Version number
Integrated RA Firmware Version number
HP Copyright information

Exit

When you choose the File menu, the utility displays a menu that you can use to
save and restore Integrated RA configuration parameters in a DOS file.
When you are ready to quit the Integrated RA Configuration Utility choose Exit
from the utilities main menu.
The utility saves the current configuration to a file and exits to the HP NetServer
Navigator.
You are now finished with the first stage of hardware setup, Integrated RA
configuration. The next stage involves installing (or updating) a utility partition on
which you can store a range of configuration and diagnostic utilities.

Installing or Updating a Utility Partition

What follows is the second stage of the hardware configuration process. In the first
stage, you configured Integrated RA. Now you need to install or update the HP
38
Integrated RA Setup and Configuration
.

Advertisement

Table of Contents
loading

Table of Contents