Touch Pad/Fingerprint Sensor Board - Toshiba Portege R500 Maintenance Manual

4 Replacement Procedures

4.21 Touch pad/Fingerprint sensor board

Removing the Touch pad/Fingerprint sensor board
To remove the touch pad/fingerprint sensor board, follow the steps below and refer to Figure
4-33 and 4-34.
1. Turn over the middle frame and disconnect the TP cable from the connector on the
touch pad board.
2. Disconnect the FP cable from the connector CN9810 on the fingerprint sensor board.
3. Turn the middle frame face up and remove the touch pad adhered with the double-
sided tape.
4. Remove the touch pad button adhered with the double-sided tape while releasing the
latches.
FP cable
TP cable
Touch pad board
Fingerprint sensor board
Figure 4-33 Removing the touch pad/fingerprint sensor board (1)
4-54 [CONFIDENTIAL]
4.21 Touch pad/Fingerprint sensor board
Touch pad
CN9810
PORTÉGÉ R500 Maintenance Manual (960-634)
Touch pad button
Latch