4 Replacement Procedures
4.7
PC card slot
Removing the PC card slot
To remove the PC card slot, follow the steps below and refer to Figure 4-9.
1. Turn over the base cover assembly.
2. Remove the following screws securing the PC card slot.
• M2×4C
• M2×3C
3. Remove the PC card slot from the base cover assembly.
M2x3C S-THIN HEAD
4-18
[CONFIDENTIAL]
S-THIN HEAD screw
S-THIN HEAD screw
PC card slot
Figure 4-9 Removing the PC card slot
×2
×2
M2x4C S-THIN HEAD
PORTÉGÉ R500 Maintenance Manual (960-634)
4.7 PC card slot