Toshiba Portege R500 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. PORTEGE R500 Series
  6. User manual

Toshiba Portege R500 User Manual

Hide thumbs Also See for Portege R500:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual , User Manual
User's Manual
PORTÉGÉ R500

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Portege R500

Summary of Contents for Toshiba Portege R500

  • Page 1 User’s Manual PORTÉGÉ R500...

  • Page 2: Table Of Contents

    Table of Contents Copyright..........v Disclaimer .
  • Page 3 Battery ..........6-4 TOSHIBA Password Utility....... . . 6-11 Power-up modes.
  • Page 4 TOSHIBA support ........

  • Page 5: Copyright

    PORTÉGÉ R500 Copyright © 2007 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 6: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, Universal Serial Bus...

  • Page 7: Eu Declaration Of Conformity

    PORTÉGÉ R500 EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary “The product complies with the requirements of Information: the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE Directive 1999/5/EC.” This product is carrying the CE-Mark in accordance with the related European Directives.

  • Page 8: Preface

    Preface Congratulations on your purchase of the PORTÉGÉ R500 series computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your PORTÉGÉ R500 computer.
  • Page 9 PORTÉGÉ R500 Icons Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information Keys The keyboard keys are used in the text to describe many computer operations.
  • Page 10 PORTÉGÉ R500 Terminology This term is defined in this document as follows: Start The word "Start" refers to the " " button in ® Microsoft Windows Vista User’s Manual...

  • Page 11: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 12: Heat Injury

    PORTÉGÉ R500 Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

  • Page 13: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 14 ■ Recovery Disc Creator ■ DVD Video Player ■ ® Ulead DVD MovieFactory ■ TOSHIBA SD Memory Utilities ■ TOSHIBA SD Memory Boot Utility ■ CD/DVD Drive Acoustic Silencer ■ TOSHIBA Assist ■ TOSHIBA ConfigFree ■ TOSHIBA HDD Protection ■...
  • Page 15 Getting Started Getting Started ■ All users should be sure to read the section Starting up for the first time. ■ Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer.

  • Page 16: Connecting The Ac Adaptor

    ■ Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 17 Getting Started 1. Connect the power cord to the AC adaptor. Figure 1-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model.

  • Page 18: Opening The Display

    Getting Started Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

  • Page 19: Turning On The Power

    Getting Started Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes for more information. ■...

  • Page 20: Sleep Mode

    Getting Started ■ Make sure the Hard Disk Drive indicator is off. If you turn off the power while a disk (disc) is being accessed, you may lose data or damage the disk. ■ Never turn off the power while an application is running. Doing so could cause loss of data.
  • Page 21 Getting Started ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options (to access it, Start -> Control Panel -> System and Maintenance -> Power Options). ■ To restore the operation of the computer from Sleep Mode, press and hold the power button or any key on the keyboard for a short amount of time.

  • Page 22: Hibernation Mode

    Getting Started When you turn the power back on, you can continue where you left when you shut down the computer. ■ When the computer is in Sleep Mode, the Power indicator will blink orange. ■ If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.

  • Page 23: Restarting The Computer

    Getting Started To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Click the arrow button ( ) in the power management buttons ) and select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid.

  • Page 24: System Recovery Options

    Getting Started System Recovery Options About 1.5GB hidden partition is allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the system in the event of a problem. The System Recovery Options feature will be unusable if this partition is deleted.

  • Page 25: System Recovery

    Recovery Discs. A writable external optical disc drive that is sold separately and compatible to the computer is required to create the Recovery Discs. It can be purchased from TOSHIBA dealers. ■ This machine supporting the following optical disc drives for...
  • Page 26 Getting Started 3. Turn on your computer and allow it to load the Windows Vista operating system from the hard disk drive as normal. 4. Insert the first blank media into the optical disc drive tray. 5. Double click the Recovery Disc Creator icon on the Windows Vista desktop, or select the application from Start Menu.
  • Page 27 2. While holding down F12 key on the keyboard, turn on your computer - when the In Touch with Tomorrow TOSHIBA logo screen appears, release the F12 key. 3. Use the left and right cursors key to select the CD-ROM icon from the menu.

  • Page 28: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section in Appendix H or click the *1 above.

  • Page 29: Left Side

    The Grand Tour Left side The following figure shows the computer’s left side. Universal Serial Bus External monitor port (USB 2.0) port (2) DC IN 15V jack i.LINK (IEEE1394) port Headphone jack Universal Serial Bus Volume control Microphone jack Cooling vents (USB 2.0) port (1) dial Figure 2-2 The left side of the computer...

  • Page 30: Right Side

    The Grand Tour Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Microphone jack A 3.5 mm mini microphone jack enables connection of a three-conductor mini jack for...
  • Page 31 The Grand Tour Optical disc drive The computer is configured with a DVD Super Multi drive. Some models are equipped with an optical disc drive. Wireless Slide this switch to the left to turn off Wireless communication LAN and Bluetooth functions. Slide it to the right switch to turn on the functions.

  • Page 32: Back

    The Grand Tour ■ Do not connect any cable other than a LAN cable to the LAN jack. It could cause damage or malfunction. ■ Do not connect the LAN cable to a power supply. It could cause damage or malfunction. Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in...

  • Page 33: Underside

    Hardware, Utilities and Options. ■ Only the TOSHIBA Slim Port Replicator II can be used with this computer. Do not attempt to use any other Port Replicator. ■ Keep foreign objects out of the docking port. A pin or similar object can damage the computer's circuitry.

  • Page 34: Front With The Display Open

    This section shows the computer with the display panel open. In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. Display screen LCD Sensor switch (Not shown) Display hinge TOSHIBA Assist button Back light On/Off button Fingerprint Sensor Display hinge Speaker...

  • Page 35: Video Mode

    Power button Press this button to turn the computer's power on and off. TOSHIBA Assist Press this button to launch the program button automatically. When power-off, Sleep Mode and Hibernation Mode, press this button to start the computer and launch the program.
  • Page 36 The Grand Tour Back light On/Off Press this button to turn on or off the back light of button the display screen. If you turn off the back light outdoors in a good weather, you can use the computer for a longer period.

  • Page 37: Indicators

    The Grand Tour Indicators This section explains indicator functions. System indicators The LED system indicators for specific computer operations glow when those operations are in progress. Figure 2-7 System indicators DC IN The DC IN indicator normally glows blue when power is being correctly supplied from the AC power adaptor.

  • Page 38: Keyboard Indicators

    The Grand Tour Keyboard indicators The following figures show the positions of the CAPS LOCK indicator and the keypad overlay indicators which show the following conditions: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed. ■...

  • Page 39: Optical Disc Drives

    This section describes the types of writable CD/DVD discs. Check the specifications of your drive to see the types of discs it can write. Use ® TOSHIBA Disc Creator and Ulead DVD MovieFactory to write compact discs. Refer to Chapter 4, Operating Basics.
  • Page 40 The Grand Tour DVDs ■ DVD-R and DVD+R discs can be written only once. The recorded data cannot be erased or changed. ■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than once. Formats The drive supports the following formats. DVD Super Multi drive The drive supports the formats CD-ROM, DVD-ROM, DVD-Video, CD-DA, CD-Text, Photo CD...

  • Page 41: Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 42: Chapter 3 Hardware, Utilities And Options

    Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer. The actual specifications may vary depending on the model you purchased. Processor ® The computer is equipped with an Intel processor. ® Intel Core 2 Duo Processor, which incorporates a 2MB level2 cache memory.
  • Page 43 Hardware, Utilities and Options Memory Built-in 512 or 1,024MB memory module is installed on the main board. Slot 512 or 1,024MB memory module can be installed in the computer's memory slot for a maximum of 1,536 or 2,048MB system memory. Video RAM The amount of Video RAM available is dependent on the computer's system memory.
  • Page 44 Hardware, Utilities and Options Disks Hard disk drive This computer is equipped with one of the following hard disk drive types. The capacity of each hard disk drive model is different. ■ 40.0 billion bytes (37.25 GB) ■ 60.0 billion bytes (55.89 GB) ■...
  • Page 45 Hardware, Utilities and Options Graphics controller The graphics controller maximizes display performance. Refer to Display Controller and Video mode section in Appendix B for more information. Legal Footnote (Graphics Processor Unit ("GPU")) For more information regarding the Graphics Processor Unit ("GPU"), please refer to the Legal Footnotes section in Appendix H or click the *7 above.

  • Page 46: Special Features

    Footnotes section in Appendix H or click the *8 above. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 47 This can be specified in the Power Options. TOSHIBA HDD This feature uses the acceleration sensor built in Protection the computer to detect vibration and shocks, and...

  • Page 48: Toshiba Value Added Package

    Hardware, Utilities and Options The TOSHIBA HDD Protection function does not guarantee that the hard disk drive will not be damaged. Hibernation Mode This feature lets you turn off the power to the computer without exiting from your software. The...

  • Page 49: Utilities And Applications

    Hardware, Utilities and Options TOSHIBA Flash The TOSHIBA Flash Cards provide a quick way to modify selected system functions and to Cards launch applications. ■ Hot key function ■ TOSHIBA utility launcher function HW Setup This utility allows you to customize your hardware settings according to the way you work with the computer and the peripherals you use.
  • Page 50 TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the...
  • Page 51 This has the same function as the Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist : This can be used to open TOSHIBA Assist if it is already installed in your computer. User’s Manual 3-10...

  • Page 52: Optional Devices

    The computer is equipped with a single PC Card slot that can accommodate a Type II format card. Any PC Card that meets industry standards, either manufactured by TOSHIBA or another vendor, can be installed as the slot supports 16-bit PC Cards and 32-bit CardBus cards.

  • Page 53: Inserting A Pc Card

    Hardware, Utilities and Options Inserting a PC Card The Windows hot-install feature allows you to insert PC Cards while the computer is turned on. Do not insert a PC Card while the computer is in Sleep Mode or Hibernation Mode as you may find that some cards do not work properly. To insert a PC Card, follow the steps as detailed below: 1.
  • Page 54 Hardware, Utilities and Options 5. Grasp the PC Card and remove it. PC Card PC Card eject button Figure 3-2 Removing the PC Card 6. Insert the Dummy card into the PC Card slot. When you do not use a PC card, please be sure to insert a Dummy card. SD/SDHC Card Set the SD Card type SD memory cards and SDHC memory cards in the SD Card slot.
  • Page 55 Hardware, Utilities and Options Inserting an SD/SDHC Card To insert an SD/SDHC Card, follow the steps as detailed below: 1. Insert the SD/SDHC Card into the SD Card slot on the side of the computer. 2. Press the SD/SDHC Card gently to ensure a firm connection is made. SD Card slot SD/SDHC Card Figure 3-3 Inserting an SD/SDHC Card...

  • Page 56: Media Care

    TOSHIBA SD Memory Card Format utility, not with the format command provided within Windows. In order to run the TOSHIBA SD Memory Card Format utility, click Start -> All Programs -> TOSHIBA -> Utilities -> SD Memory Card Format.

  • Page 57: Memory Card Care

    The Front Side Bus (FSB) Speed for this computer is 533MHz. While 667MHz memory modules can be installed, the FSB will depend on the computer. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions.

  • Page 58: Installing A Memory Module

    Hardware, Utilities and Options Point to note about memory module error ■ If you install a memory module that is not compatible with the computer, the Power indicator will flash (on for 0.5 seconds, off for 0.5 seconds) in the following way; ■...
  • Page 59 Hardware, Utilities and Options 5. Slide your fingernail or a thin object under the cover and lift it off. Memory module cover Screws Figure 3-5 Removing the memory module cover 6. Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 45 degree angle before holding it down until the latches on either side snap into place.

  • Page 60: Removing A Memory Module

    Hardware, Utilities and Options 7. Seat the memory module cover in place and secure it with two screws. Take care to ensure that the memory module cover is firmly closed. Memory module cover Screws Figure 3-7 Seating the memory module cover 8.
  • Page 61 Hardware, Utilities and Options 7. Grasp the module by its edges and remove it from the computer. ■ If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them.

  • Page 62: External Monitor

    Hardware, Utilities and Options External monitor An external analog monitor can be connected to the external monitor port on the computer. To connect a monitor, follow the steps as detailed below: Connecting the monitor cable 1. Turn the computer's power off. 2.

  • Page 63: Usb Fdd Kit

    Hardware, Utilities and Options USB FDD Kit The USB floppy diskette drive accommodates either a 1.44MB or 720KB floppy diskette and connects to one of the computer's USB ports. USB connector Disk-In-Use Indicator Floppy diskette slot Eject button Figure 3-10 The USB floppy diskette drive Connecting the USB floppy diskette drive To connect the drive, plug the floppy diskette drive’s USB connector into a computer’s USB port.
  • Page 64 There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. ■ Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
  • Page 65 Refer also to the documentation that came with your i.LINK device. TOSHIBA Slim Port Replicator II In addition to the ports available on the computer, the TOSHIBA Slim Port Replicator II. The TOSHIBA Slim Port Replicator II connects directly to the docking interface on the underside of the computer.

  • Page 66: Security Lock

    Hardware, Utilities and Options ■ You must connect the AC adaptor before you connect to a TOSHIBA Slim Port Replicator II. ■ When a TOSHIBA Slim Port Replicator II is connected to the computer, you can not use the following computer's ports: LAN jack, DC IN 15V jack and External monitor port.

  • Page 67: Optional Accessories

    Bluetooth USB A Bluetooth adaptor that has a USB connector. Adaptor Wireless communications can be carried out with Bluetooth-compatible equipment by connecting to the USB port of the computer. You can buy the module from a TOSHIBA dealer. User’s Manual 3-26...
  • Page 68 The Bluetooth 2.0+EDR Module Kit is an internal Module Kit computer module which supports both Bluetooth V2.0 and EDR. You can buy the module from a TOSHIBA dealer. External DVD Super The DVD Super Multi Drive can run either 12 cm Multi Drive (4.72") or 8 cm (3.15") CD/DVDs without an...

  • Page 69: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 70: Using The Fingerprint Sensor

    Operating Basics You can also tap the Touch Pad to perform functions similar to those of the left button on a standard mouse. Click: Tap once Double-click: Tap twice Drag and drop: Tap to select the item(s) you want to move, leave your finger on the Touch Pad after the second tap and then move the item(s) to their new destination.
  • Page 71 Operating Basics ■ Avoid swiping with your finger stiff or pressed too hard onto the sensor, and take care to ensure that the center of the fingerprint is touching the sensor before swiping. Either of these conditions may cause fingerprint reading to fail.
  • Page 72 Operating Basics Observe the following to improve the fingerprint recognition success rate. ■ Enroll two or more fingers. ■ Enroll additional fingers if a recognition failure often occurs when using already enrolled fingers. ■ Check the condition of your finger - any conditions which have changed since enrollment, such as injury, rough skin, and extremely dry, wet, soiled, dirty, oily, soaked or swollen fingers, may lower the recognition success rate.
  • Page 73 Operating Basics 3. On the User's Fingers screen click the box above the finger you wish to register. If any of the previously enrolled fingerprints is selected again, the latest information will be enrolled and any previous information over-written. 4. The Fingerprint Enrollment screen will be displayed and the tutorial will begin.

  • Page 74: Points To Note About The Fingerprint Utility Software

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
  • Page 75 ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint Pre-OS Authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.
  • Page 76 It is necessary to register the User/BIOS Password and Windows Logon Password before using the Fingerprint Pre-OS Authentication and this Fingerprint Single-Swipe Sign On Feature. Please use the TOSHIBA Password Utility to register your User/BIOS Password. If Windows Logon is not the default for your system, see Manual to register your Windows Logon Password.

  • Page 77: Using Optical Disc Drives

    TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.

  • Page 78: Loading Discs

    Operating Basics Loading discs To load CD/DVDs, follow the steps below. 1. When the computer’s power is on, press the eject button to open the disc tray slightly. 2. Grasp the disc tray gently and pull until it is fully opened. Eject button Disc tray Figure 4-3 Pressing the eject button and pulling the disc tray open...

  • Page 79: Removing Discs

    Operating Basics ■ Do not touch the laser lens or any portion of its surrounding casing as this could cause misalignment. ■ Prevent foreign objects from entering the drive. Check the surface of the disc tray, especially the area behind the front edge of the disc tray, to make sure there are no such objects before closing the drive.
  • Page 80 Operating Basics 2. The CD/DVD extends slightly over the sides of the disc tray so you can grasp it. Gently lift out the CD/DVD. Figure 4-6 Removing a CD/DVD 3. Push the center of the disc tray to close it. Press gently until it locks into place.

  • Page 81: Writing Cd/Dvds On Dvd Super Multi Drives

    Do not turn off the power to the optical disc drive while the computer is accessing it as this may cause you to lose data. ■ To write data to CD-R/-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. ■...

  • Page 82: Before Writing Or Rewriting

    CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW or DVD-RAM media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., LTD.
  • Page 83 Operating Basics DVD-RAM: (DVD Super Multi drive only) DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd. ■ This drive cannot use discs that allow writing faster than 16x speed (DVD-R and DVD+R media), 8x speed (DVD+RW media), 6x speed (DVD-RW media), 5x speed (DVD-RAM media).

  • Page 84: When Writing Or Rewriting

    CD/DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator and Ulead DVD ® MovieFactory has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 85: Toshiba Disc Creator

    CD Player' function to record music to DVD-R, DVD-RW, DVD+R or DVD+RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video or DVD-ROM material that has copyright protection. ■ DVD-RAM discs cannot be backed up using the 'Disc Backup' function of TOSHIBA Disc Creator.
  • Page 86 How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.
  • Page 87 Operating Basics Simplified steps for making a DVD-Video from adding video source: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Click Video Disc -> New Project to invoke 2nd Launcher, choose your project type, then invoke DVD MovieFactory.

  • Page 88: Media Care

    Operating Basics 2. Before recording the video to DVD ■ When you record DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD. ■...

  • Page 89: Floppy Diskettes

    Operating Basics 3. Do not write on, apply a sticker to, or otherwise mar the surface of the CD or DVD that contains the data. 4. Hold the CD or DVD by its outside edge or the edge on the center hole - any fingerprints on the surface of the disc can prevent the drive from properly reading data.

  • Page 90: Sound System

    Operating Basics Sound System This section describes some of the audio control functions. Volume Mixer The Volume Mixer utility lets you control the audio volume for playback of devices and applications under Windows. ■ To launch the Volume Mixer utility, right click on the speaker icon on the taskbar, and select Open Volume Mixer from the sub menu.
  • Page 91 You can change the sample rate and bit depth of sound. TOSHIBA Mic Effect TOSHIBA Mic Effect provides you with a hands-free environment for holding mutual communication via the Internet Protocol or Local Area Network. If you wish to communicate with someone on your computer, you can use a messenger application.

  • Page 92: Wireless Communications

    5. On the Advanced tab, select “2 channel, 16 bit, 48000 Hz (DVD Quality)” in the pull-down menu of the Default Format pane. 6. On the TOSHIBA Mic Effect tab, select the Enable Echo Canceller check box, and click Apply.

  • Page 93: Bluetooth Wireless Technology

    ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Bluetooth wireless technology ®...

  • Page 94: Wireless Communication Switch

    ® ® This Bluetooth Stack is based on the Bluetooth Version 1.1/1.2/2.0+EDR specification. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic ® devices that use Bluetooth , other than TOSHIBA notebook computers. ®...

  • Page 95: Lan

    Operating Basics Wireless communication Indicator The wireless communication indicator shows the status of the computer's wireless communication functions. Indicator status Indication Indicator off The wireless communication switch is off - no wireless functionality is available. Indicator glows Wireless communication switch is on. Wireless LAN or Bluetooth is turned on by an application.

  • Page 96: Connecting The Lan Cable

    Operating Basics Connecting the LAN cable To connect the LAN cable, follow the steps as detailed below: ■ Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. If you disconnect the AC Adaptor while the computer is accessing a LAN, the system may hang up.

  • Page 97: Computer Handling

    Operating Basics Computer Handling This section explains computer handling and maintenance. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and dirt, and use care with all liquids around it. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely - in these circumstance you should get the computer inspected by an authorized service provider in order to assess the scope of any...

  • Page 98: Using The Hard Disk Drive (Hdd) Protection

    This computer has a function for reducing the risk of damage on the hard disk drive. Using an acceleration sensor built into the computer, TOSHIBA HDD Protection detects vibration shocks and similar signs of movement of the computer, and automatically moves the Hard Disk Drive head to a safe position to reduce the risk of damage that could be caused by head-to-disk contact.

  • Page 99: Toshiba Hdd Protection Properties

    Operating Basics TOSHIBA HDD Protection Properties You can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection Properties window. To open the window, click Start -> All Programs -> TOSHIBA -> Utilities -> HDD Protection Settings. The window can also be started from the icon on the Taskbar or from the Control Panel.

  • Page 100: Heat Dispersal

    Operating Basics Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.

  • Page 101: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.

  • Page 102: Function Keys: F1

    Soft keys: FN key combinations The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 103: Hot Keys

    The Keyboard Press FN + F10 or FN + F11 to access the computer's integrated keypad. When activated, the keys with grey markings on their bottom edge become either numeric keypad keys (FN + F11) or cursor control keys (FN + F10). Please refer to the Keypad overlay section in this chapter for more...
  • Page 104 The Keyboard Sleep: Pressing FN + F3 switches the system to Sleep mode. Hibernate: Pressing FN + F4 switches the system to Hibernate mode. Output: Pressing FN + F5 changes the active display device. Brightness Down: Pressing FN + F6 decreases the computer's display panel brightness in individual steps.

  • Page 105: Windows Special Keys

    FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number" key. To start the TOSHIBA Accessibility utility, click Start -> All Programs ->...

  • Page 106: Keypad Overlay

    The Keyboard Keypad overlay Your computer's keyboard does not have a separate numeric keypad but includes a numeric keypad overlay which functions like one - this is located in the center of the keyboard with the relevant keys having grey letters at their front edge.

  • Page 107: Generating Ascii Characters

    The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard functions without having to turn the overlay off: 1. Hold down FN key and press any other key - this key will operate as if the overlay were off.

  • Page 108: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes.

  • Page 109: Monitoring Of Power Condition

    Power and Power-Up Modes Table 6-1 Power conditions continued Power on Power off (no operation) Battery charge • Operates adaptor is above low • LED: Battery off battery trigger DC IN off connected point Battery charge • Operates is below low •...

  • Page 110: Dc In Indicator

    Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: Blue Indicates the AC adaptor is connected and is correctly supplying power to the computer. Flashing orange Indicates a problem with the power supply.

  • Page 111: Battery

    Power and Power-Up Modes Battery This section explains battery types, use, recharging methods and handling. Battery types The computer has two different types of batteries. Battery pack When the AC adaptor is not connected, the computer's main power source is a removable lithium ion battery pack, also referred to in this manual as the main battery.
  • Page 112 Do not turn on the computer's power again until an authorized Toshiba service provider has checked it for safety. Continued use could cause a fire or rupture possibly resulting in serious injury or computer failure including but not limited to the loss of data.

  • Page 113: Charging The Batteries

    ■ The computer's RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.

  • Page 114: Battery Charging Notice

    Power and Power-Up Modes Battery charging notice The battery may not begin charging immediately under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all). To ensure the battery charges to its full capacity, you should charge it at room temperature of between 5°...

  • Page 115: Maximizing Battery Operating Time

    Power and Power-Up Modes Technology which increases battery operating time This computer is equipped with technology which increases battery operating time. The following functions allow for increased battery operating time. 1. Semi-transparent LCD ■ BackLight On/Off button (please refer to the Special features section in Chapter 3, Hardware, Utilities and Options.) ■...

  • Page 116: Retaining Data With Power Off

    Power and Power-Up Modes ■ The condition of the battery terminals - you should always ensure the terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Retaining data with power off Refer to User Information Guide about Charging time. Extending battery life To maximize the life of your battery packs: ■...

  • Page 117: Replacing The Battery Pack

    Power and Power-Up Modes Replacing the battery pack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and will need to be replaced when it reaches the end of its operating life.

  • Page 118: Toshiba Password Utility

    Figure 6-2 Securing the battery pack 3. Turn your computer over. TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set by the TOSHIBA Password Utility function are different from the Windows password.
  • Page 119 ■ If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held...

  • Page 120: Supervisor Password

    If an unformatted card or one with an incompatible format is inserted, you will be prompted to format it with a tool named TOSHIBA SD Memory Card Format. To start the format tool, point to or click the following items: Start ->...

  • Page 121: Power-Up Modes

    Power and Power-Up Modes Starting the computer by password If you have already registered a password, there are three ways to start the computer: ■ Insert an SD Card token before you turn on the computer. The computer will start normally, without displaying a password prompt. ■...

  • Page 122: Panel Power On/Off

    Power and Power-Up Modes Hot keys You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter Hibernation Mode - please refer to Chapter 5, The Keyboard for further details. Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it.

  • Page 123: Chapter 7 Hw Setup & Bios Setup

    Accessing HW Setup To run the HW Setup program, click Start -> All Programs -> TOSHIBA -> Utilities -> HWSetup. HW Setup window The HW Setup window contains a number of tabs (General, Display, Boot Priority, Keyboard, CPU, LAN, Device Config and USB) to allow specific functions of the computer to be configured.

  • Page 124: Power On Display

    HW Setup & BIOS Setup General This window displays the BIOS version and contains two buttons : Default and About. Return all HW Setup values to the factory Default settings. Display the HW Setup version. About Setup This field displays the installed BIOS version and date. Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor.

  • Page 125: Boot Priority

    HW Setup & BIOS Setup Boot Priority Boot Priority Options This tab allows you to select the priority for booting the computer - the following settings are available: FDD −> HDD −> CD- The computer looks for bootable files on devices ROM −>...
  • Page 126 HW Setup & BIOS Setup To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. 2. The following menu will be displayed with the following icons: Built-in hard disk drive, CD-ROM, FDD (or SD memory card), Network (LAN), USB Memory boot.
  • Page 127 HW Setup & BIOS Setup USB Memory BIOS Support Type This option allows you to set the type of the USB memory to be used as a startup device. Sets the USB memory to be the equivalent of a hard disk drive (default). With this setting, the USB memory device can be used to start the computer as though it were a hard disk drive based on the hard disk drive settings within both...
  • Page 128 HW Setup & BIOS Setup This function allows you to set the processor's operating mode. Dynamic CPU Frequency Mode This option allows you to configure the power saving modes associated with the processor - the following settings are available: The processor's power consumption and Dynamically automatic clock speed switching functions are Switchable...

  • Page 129: Device Config

    HW Setup & BIOS Setup Built-in LAN This feature enables or disables the Built-in LAN. Enables Built-in LAN functions (Default). Enabled Disables Built-in LAN functions. Disabled Device Config Device Configuration This option allows you to set how the computer's hardware devices will be configured.

  • Page 130: Bios Setup Program

    ■ In most cases, changes to the system's configuration should be made within Windows by using applications such as TOSHIBA HW Setup, TOSHIBA Password Utility, Windows Device Manager and so forth. If you make changes to the configuration through the BIOS setup program, please be aware that the configuration set through the Windows applications will take priority.
  • Page 131 Registered The User Password and Supervisor Password configured in BIOS SETUP can also be changed or deleted using the TOSHIBA Password Utility. When unable to perform the following operations, use the TOSHIBA Password Utility to change the configuration or delete the Supervisor Password.

  • Page 132: Virtualization Technology

    HW Setup & BIOS Setup Virtualization Technology ® Virtualization Technology sets enable or disable of the Intel Virtualization Technology installed in the CPU. ® Intel Virtualization Technology is the technique that allows one machine to operate as multiple virtual machines. The Virtualization Technology is supported with some models.

  • Page 133: Auto Power On

    HW Setup & BIOS Setup Auto Power On This is a function for automatically turning on the computer. This item shows the current Auto Power On setting. When Alarm Time, Wake-up on LAN, or Critical Battery Wake-up are Enabled, Auto Power On is also Enabled.

  • Page 134: Lcd Display Stretch

    HW Setup & BIOS Setup LCD Display Stretch Select the display function of the computer's display panel. Display modes with low resolution are stretched Enabled and displayed (Default). Display modes with low resolution are not Disabled stretched and displayed in their original state. Security controller Please note that the security controller settings are available on the second page of the BIOS setup application.

  • Page 135: Diagnostic Mode

    HW Setup & BIOS Setup Diagnostic Mode Allows you to set whether the BIOS diagnostic test is enabled or disabled. The diagnostic test is disabled (Default). Disabled The diagnostic test is enabled. Enabled SATA Controller Mode This feature sets the SATA Controller Mode. The SATA Controller Mode is supported with some models.

  • Page 136: Chapter 8 Troubleshooting

    Chapter 8 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.

  • Page 137: Preliminary Checklist

    Troubleshooting Preliminary checklist You should always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet can cause what appears to be a serious problem: ■ Make sure you turn on all peripheral devices before you turn on the computer - this includes your printer and any other external device you are using.

  • Page 138: Hardware And System Checklist

    Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 139: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: ■...

  • Page 140: Ac Power

    Troubleshooting Problem Procedure Computer shuts down Leave the computer off until the DC IN indicator and DC IN indicator stops blinking. blinks orange It is recommended to leave the computer off until the interior reaches room temperature even though the DC IN indicator stops blinking. If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact your reseller, dealer or...
  • Page 141 Troubleshooting Problem Procedure Battery doesn’t charge If the battery is completely discharged, it will not when the AC adaptor is begin charging immediately, in these instances attached (Battery you should wait a few minutes before trying again. indicator does not glow If the battery still does not charge, you should orange).

  • Page 142: Real Time Clock

    Password Problem Procedure Cannot enter password Please refer to the TOSHIBA Password Utility section in Chapter 6, Power and Power-Up Modes for further information. Keyboard Keyboard problems can be caused by the setup and configuration of the...

  • Page 143: Hard Disk Drive

    Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 144: Dvd Super Multi Drive

    Troubleshooting Problem Procedure Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utility to check the condition of your files and the hard disk drive. Please refer to the operating system's documentation or online Help File for further information on operating and using the Defragmentation utility.

  • Page 145: Usb Floppy Diskette Drive

    Troubleshooting Check the type of CD/DVD you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video CD-ROM: CD-DA, CD-Text, Photo CD (single/multi-session), CD-ROM Mode 1, Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-EXTRA), Addressing Method 2 Recordable DVD: DVD-R/-R DL, DVD+R/+R DL, DVD-RW, DVD+RW, DVD-RAM Check the region code on the DVD.

  • Page 146: Pc Card

    Troubleshooting PC Card For further information, please refer to Chapter 3, Hardware, Utilities and Options. Problem Procedure PC Card error occurs Remove the PC Card from the computer and then reinsert it in order to ensure it is firmly connected. In the event that the PC Card is attached to an external peripheral device, ensure that this connection is properly made.

  • Page 147: Pointing Device

    Troubleshooting Pointing device If you are using a USB mouse, you should also refer to both the device section in this chapter, and the documentation supplied with your mouse. Touch Pad Problem Procedure On-screen pointer does In this instance the system might be busy - Try not respond to pointing moving the mouse again after waiting a short device operation...

  • Page 148: Usb Mouse

    Troubleshooting Problem Procedure The reaction of Touch Adjust the touch Sensitivity. pad is either too 1. Click Start -> Control Panel -> Hardware sensitive or not and Sound -> Mouse icon. sensitive enough. 2. Within the Mouse Properties window, click the Advanced tab.

  • Page 149: Fingerprint Sensor

    Troubleshooting Problem Procedure The mouse pointer In this instance, you should initially try changing moves too fast or too the speed setting within the Mouse Control utility. slow 1. To access this utility, click Start -> Control Panel -> Hardware and Sound -> Mouse icon.

  • Page 150: Usb Device

    USB, you are still able to use a USB mouse and/or USB keyboard by setting the USB KB/Mouse Emulation option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
  • Page 151 Troubleshooting Problem Procedure If you install a memory In all instances you should shut down the module which is larger computer and install a different memory module than the maximum which keeps the total system memory, inclusive capacity of the of the main board memory module, within computer, the Power 2,048MB.
  • Page 152 Troubleshooting External monitor Please also refer to Chapter 3, Hardware, Utilities and Options, and to the documentation supplied with your monitor for further information. Problem Procedure Monitor does not turn After confirming that the monitor's power switch is on, you should check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet.

  • Page 153: I.link (Ieee1394) Device

    Troubleshooting i.LINK (IEEE1394) device Problem Procedure i.LINK device does not Make sure the cable is securely connected to the function computer and to the device. Make sure the device’s power is turned on. Reinstall the drivers. Open the Windows Control Panel and double-click the Add Hardware icon.

  • Page 154: Recovery Discs

    Recovery Discs section in Chapter1, Getting Started. You will be directed to select "Restore Original Factory Image" from the drop-down menu. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. User’s Manual 8-19...
  • Page 155 Troubleshooting Disposing of the computer and the computer's batteries ■ Discard this computer in accordance with applicable laws and regulations. For further information, contact your local government. ■ This computer contains rechargeable batteries. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them.

  • Page 156: Toshiba Support

    Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.
  • Page 157 Troubleshooting Outside of Europe In Europe Singapore Spain TOSHIBA Singapore Pte. Ltd. TOSHIBA Information Systems, 438B Alexandra Road #06-01 ESPAÑA Alexandra Technopark Singapore Parque Empresarial San Fernando 119968 Edificio Europa, l Planta, Escalera A 28830 Madrid United States of America...

  • Page 158: Appendix A Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Refer to User Information Guide about Weight and Size. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% Non-operating -20°C (-4°F) to 65°C (149°F) 10% to 90% Thermal Gradient 20°C per hour maximum Wet-bulb...

  • Page 159: Power Requirements

    Specifications Power Requirements AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 15 V DC 3.0/4.0 amperes (different for each model) User’s Manual...

  • Page 160: Display Controller And Video Mode

    Appendix B Display Controller and Video mode Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel's increased resolution, lines may appear broken in when displaying images in full-screen text mode. The display controller also controls the video mode and uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed at any one time.

  • Page 161: Wireless Lan

    Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card ■ IEEE 802.11 Standard for Wireless LANS Compatibility ■...

  • Page 162: Radio Characteristics

    Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.

  • Page 163: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 164 Wireless LAN ■ In a Wireless LAN Access Point, the Wireless LAN card will use the factory-set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device. Wireless IEEE 802.11 Channels Sets (Revision A and N Draft Ver. 1.0) Frequency Range 5150-5850 MHz Channel ID...

  • Page 165: Appendix D Intel ® Matrix Storage Manager

    Appendix D ® Intel Matrix Storage Manager If you are installing the operating system on a computer system which is ® configured for AHCI mode, you must pre-install the Intel Matrix Storage Manager driver using the F6 installation method described in the Manually Setting up Windows (Windows Vista™) Manually Setting up Windows...

  • Page 166: Manually Setting Up Windows Manually (Windows Xp

    Intel® Matrix Storage Manager Windows Setup Procedure 1. Connect the USB floppy diskette drive and insert the above disk. 2. Insert the Windows Setup DVD into the optical disc drive and boot the computer from the DVD. The Windows Setup program will start. 3.

  • Page 167: How To Install Intel Matrix Storage Manager On Windows Xp Or Windows Vista

    Intel® Matrix Storage Manager 3. When the message "Press F6 if you need to install a third party SCSI or RAID driver" appears on the screen, press the F6 key. 4. When the message "Setup will load support for the following mass storage device(s):"...

  • Page 168: Appendix E Bluetooth Wireless Technology Interoperability

    Bluetooth wireless technology Interoperability ® Bluetooth Adaptor from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ■ Bluetooth Specification Ver. 2.0+EDR, as defined and approved by The Bluetooth Special Interest Group.
  • Page 169 ® Always use Bluetooth Adaptor from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe http://www.pc.support.global.toshiba.com in the United States for more...

  • Page 170: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 171 ■ Consult the dealer or an experienced radio/TV technician for help. TOSHIBA is not responsible for any radio or television interference caused ® by unauthorized modification of the devices included with this Bluetooth Adaptor from TOSHIBA, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.
  • Page 172 FCC radio frequency exposure limits. Nevertheless, the ® Bluetooth Adaptor from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used in this device are located at the upper edge of the LCD screen, and this device has been tested as portable device as defined in Section 2.1093 of FCC rules when the LCD screen is rotated 180 degree...

  • Page 173: Using Bluetooth Adaptor From Toshiba Equipment In Japan

    3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.

  • Page 174: Device Authorization

    Bluetooth wireless technology Interoperability Device Authorization This device obtains the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Telecommunications Business Law. The Name of the radio equipment: EYXF3CS JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT Approval Number: D05-0074001...

  • Page 175: Ac Power Cord And Connectors

    Appendix F AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 176 AC Power Cord and Connectors Finland: FIMKO Sweden: SEMKO France: LCIE Switzerland: Germany: United Kingdom: In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug configuration must be 6- 15P (250V) or 5-15P (125V) as designated in the U.S.

  • Page 177: Toshiba Anti-Theft Protection Timer

    BIOS and Hard Disk Drive to gain access to the system. To set permissions and limits for the TOSHIBA Anti-theft Protection Timer please use the TOSHIBA Password Utility. The settings can only be activated or modified by a user with supervisor authority.

  • Page 178: Appendix H Legal Footnotes

    Appendix H Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.
  • Page 179 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions under "Environmental Conditions" in your computer documentation. Contact Toshiba Technical Service and Support for more information. 64-Bit Computing ® The following section applies only to Intel...

  • Page 180: Memory (Main System)*3

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 181: Graphics Processor Unit

    Legal Footnotes Graphics Processor Unit ("GPU") Graphics processor unit ("GPU") performance may vary depending on product model, design configuration, applications, power management settings and features utilized. GPU performance is only optimized when operating in AC power mode and may decrease considerably when operating in battery power mode.

  • Page 182: Glossary

    Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-ReWritable...
  • Page 183 Glossary LED: light emitting diode LSI: large scale integration MB: megabyte MS-DOS: Microsoft Disk Operating System OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output...
  • Page 184 Glossary application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games. ASCII: American Standard Code for Information Interchange. ASCII code is a set of 256 binary codes that represent the most commonly used letters, numbers, and symbols.
  • Page 185 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 186 Glossary components: Elements or parts (of a system) which make up the whole (system). computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
  • Page 187 Glossary dialog box: A window that accepts user input to make system settings or record other information. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk.
  • Page 188 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 189 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 190 Glossary keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer. For each key, the transmitted code is, in turn, representative of the (ASCII) character marked on the key.
  • Page 191 Glossary non-system disk: A formatted floppy diskette you can use to store programs and data but you cannot use to start the computer. See system disk. nonvolatile memory: Memory, usually read-only (ROM), that is capable of permanently storing information. Turning the computer’s power off does not alter data stored in nonvolatile memory.
  • Page 192 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 193 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 194 Glossary volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer. warm start: Restarting or resetting a computer without turning it off. window: A portion of the screen that can display its own application, document or dialog box.

  • Page 195: Index

    Toshiba 3-9 using 4-2 Bluetooth USB Adaptor 3-26 Floppy diskette care 4-21 problems 8-19 FN + 1 (TOSHIBA Zooming Utility reduce) Wireless Optical Mouse 3-27 Wireless Stereo Headset 3-27 FN + 2 (TOSHIBA Zooming Utility enlarge) Boot Priority 7-3 FN + ENTER 5-3...
  • Page 196 Power Plan 5-3 cable types 4-27 Sleep 5-4 connecting 4-28 TOSHIBA Zooming Utility (enlarge) disconnecting 4-28 jack 2-4 TOSHIBA Zooming Utility (reduce) 5-5 problems 8-18 Touch Pad 5-4 Wireless 5-4 Zoom 5-4 Media care 4-20 HW Setup Card care 3-15...
  • Page 197 3-6 Self test 8-4 problems 8-7 Sound system 8-16 Starting the computer by 6-14 System start-up 8-4 Supervisor 6-13 TOSHIBA support 8-21 user 6-11 Touch Pad 8-12 PC Card 3-11 USB device 8-15 inserting 3-12 USB floppy diskette drive 8-10...
  • Page 198 TOSHIBA Disc Creator 3-10, 4-17 TOSHIBA DVD-RAM Utility 3-10 TOSHIBA HDD Protection 3-6 TOSHIBA PC Diagnostic Tool 3-7 TOSHIBA SD Memory Boot Utility 3-9 TOSHIBA SD Memory Card Format 3-9 TOSHIBA Slim Port Replicator II 3-26 TOSHIBA Value Added Package 3-7...

Table of Contents