4.9 Wireless LAN card
4.9
Wireless LAN card
Removing the Wireless LAN card
To remove the wireless LAN card, follow the steps below and refer to Figure 4-11.
1. Disconnect three (or two) wireless LAN antenna cables from the wireless LAN card.
2. Remove the following screws securing wireless LAN card.
• M2×4C
3. Disconnect the wireless LAN card from the connector CN2600 on the system board.
M2×4C S-THIN HEAD
Wireless LAN antenna cable (three)
M2×4C S-THIN HEAD
Wireless LAN antenna cable (two)
PORTÉGÉ R500 Maintenance Manual (960-634)
S-THIN HEAD screw
Figure 4-11 Removing the wireless LAN card
4 Replacement Procedures
×2
Wireless LAN card
Wireless LAN card
CN2600
[CONFIDENTIAL]
CN2600
4-21