Touch Pad/Fingerprint Sensor Board - Toshiba PORTEGE Z830 Satellite Z830 Maintenance Manual

4.11 Touch pad/Fingerprint sensor board

4.11 Touch pad/Fingerprint sensor board
Removing the Touch pad/Fingerprint sensor board
To remove the touch pad/fingerprint sensor board, follow the steps below and refer to Figure
4-18 to 4-21.
1. Disconnect the TP board FFC from the connector CN3380 on the TP board.
2. Disconnect the TP FFC from the connector CN3240 on the fingerprint sensor board
and connector on the touch pad.
3. Disconnect the FP FFC from the connector CN3650 on the fingerprint sensor board
and connector CN9551 on the TP board.
TP board FFC
TP FFC
Figure 4-18 Removing the touch pad/fingerprint sensor board (1)
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
Connector
CN3380
4 Replacement Procedures
FP FFC
CN3650
CN9551
[CONFIDENTIAL]
CN3240
4-41