4.13 Bluetooth module
4.13 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-16.
*The Bluetooth module is not mounted in some models.
1. Disconnect the USB cable carefully from the connector CN9610 on the USB board.
2. Disconnect the Bluetooth antenna cable and Bluetooth cable from the connector on
the Bluetooth module.
3. Remove the following screw and Bluetooth module.
• M2×3C
Bluetooth module
Bluetooth antenna cable
PORTÉGÉ R500 Maintenance Manual (960-634)
S-THIN HEAD
Figure 4-16 Removing the Bluetooth module
4 Replacement Procedures
×1
M2x3C S-THIN HEAD
USB cable
Bluetooth cable
CN9610
[CONFIDENTIAL]
4-29