Toshiba Portege R500 Maintenance Manual page 249

Maintenance manual

Hide thumbs Also See for Portege R500:

Table of Contents

4.14 HDD/SSD

4.14.2 1.8" HDD

Removing the 1.8" HDD

To remove the 1.8" HDD, follow the steps below and refer to Figure 4-18.

1. Turn over the 1.8" HDD in the direction of the arrow in the figure below and remove

four cushions from the 1.8" HDD.

2. Disconnect the 1.8" HDD cable from the connector on the 1.8" HDD.

CAUTION: The 1.8-inch HDD cable and SSD cable are the same.

PORTÉGÉ R500 Maintenance Manual (960-634)

Connector of the 1.8" HDD

Figure 4-18 Removing the 1.8" HDD

4 Replacement Procedures

1.8" HDD cable

[CONFIDENTIAL]

Chapters

Table of Contents