Toshiba Portege R500 Maintenance Manual page 267

4.20 Display portion
5. Push the hook outside and remove the application button holder.
6. Disconnect the sensor cable from the connector on the sensor board.
7. Remove the sensor board from the application button holder.
Application button holder
8. Remove the power switch holder from the slot.
Installing the Display portion
PORTÉGÉ R500 Maintenance Manual (960-634)
Sensor cable
Figure 4-31 Removing the display portion (2)
Figure 4-32 Removing the display portion (3)
4 Replacement Procedures
Sensor board
Hook
Power switch holder
[CONFIDENTIAL] 4-51