4 Replacement Procedures
4.20 Display portion
Removing the Display portion
To remove the display portion, follow the steps below and refer to Figure 4-30 to 4-32.
1. Open the display 90 degrees and put the computer on the stand.
2. Pull out the wireless LAN antenna cables under the insulator.
3. Remove the following screws securing the hinge.
• M2.5×4C
4. Lift the display portion a little and remove it from the middle frame.
M2.5x4C S-THIN HEAD
Wireless LAN
antenna cable
Middle frame
4-50
[CONFIDENTIAL]
S-THIN HEAD
M2.5x4C S-THIN HEAD
Insulator
Figure 4-30 Removing the display portion (1)
×2
Display portion
PORTÉGÉ R500 Maintenance Manual (960-634)
4.20 Display portion