Toshiba Portege R500 Maintenance Manual page 248

Maintenance manual

Hide thumbs Also See for Portege R500:

Table of Contents

4 Replacement Procedures

4.14.1 2.5" HDD

Removing the 2.5" HDD

To remove the 2.5"HDD, follow the steps below and refer to Figure 4-17.

1. Lift up the 2.5" HDD in the direction of the arrow in the figure below.

2. Disconnect the 2.5" HDD cable from the connector on the 2.5" HDD.

Connector of the

Installing the 2.5" HDD

To install the 2.5" HDD, follow the steps below and refer to Figure 4-17.

1. Connect the 2.5" HDD cable to the connector on the 2.5" HDD.

2. Set the 2.5" HDD into the guides of the slot.

[CONFIDENTIAL]

2.5" HDD cable

Figure 4-17 Removing the 2.5" HDD

PORTÉGÉ R500 Maintenance Manual (960-634)

4.14 HDD/SSD

Chapters

Table of Contents