4.15 Sound board/Internal microphone
4.15 Sound board/Internal microphone
Removing the Sound board/Internal microphone
To remove the sound board/internal microphone, follow the steps below and refer to Figure
4-20 and Figure 4-21.
1. Remove the following screw securing the sound board.
• M2×4C
2. Disconnect the sound cable and speaker cable from the connector CN9510 and
CN6350 on the sound board and remove the sound board from the slot.
Figure 4-20 Removing the sound board/internal microphone (1)
PORTÉGÉ R500 Maintenance Manual (960-634)
S-THIN HEAD
Sound board
CN6350
Speaker cable
Sound cable
4 Replacement Procedures
×1
M2x4C S-THIN HEAD
CN9510
[CONFIDENTIAL]
4-37