4 Replacement Procedures
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below and refer to Figure 4-16.
1. Set the Bluetooth module to the slot and secure it with the following screw.
• M2×3C
2. Connect the Bluetooth antenna cable and Bluetooth cable to the connector on the
Bluetooth module.
3. Connect the USB cable to the connector CN9610 on the USB board.
CAUTION: When connecting the USB cable, insert it carefully not to bend the connector
portion.
4-30
[CONFIDENTIAL]
S-THIN HEAD
4.13 Bluetooth module
×1
PORTÉGÉ R500 Maintenance Manual (960-634)