Consult your network operating system (NOS) documentation
to determine the maximum amount of memory supported by
The upgrade kit comes with two processors and four terminators. You can
purchase additional processors for a total of six processors
You cannot move processors from the LH 3000/3000r to the
When the HP NetServer LH 6000/6000r is configured with
multiple processors, all the processors must have the same
frequency, stepping, and cache size. For example, do not mix
550-MHz processors that have different-sized caches.
Returning LH 3000 Components to HP
During the upgrade process, some NetServer LH 3000/3000r components are
removed and replaced by LH 6000/6000r components. You can return all removed
to parts to Hewlett-Packard for recycling.
Purpose of This Guide
This guide describes the steps you need to perform to convert the HP NetServer
LH 3000/3000r to the HP NetServer LH 6000/6000r. This guide includes the
Chapter 1, "Introduction," lists the upgrade kit contents, explains what
accessories you might need before you begin the upgrade, and identifies
related documentation you might need.
Chapter 2, "Preparing for the Upgrade," identifies the necessary tools,
instructs you to back up your data, and describes how to check the system
Chapter 3, "Removing Components from LH 3000," explains how to
remove the system board, chassis guides, and air baffles.