HP D7171A - NetServer - LPr Upgrade Manual page 21

Chapter 3
2. Unscrew the non-captive thumbscrews securing the two air baffles to the
chassis.
In the HP NetServer LH 3000 (pedestal version), you can see the
thumbscrews from the top of the NetServer. See Figure 3-5.
In the HP NetServer LH 3000r (rack-mounted version), you can see the
thumbscrews from the right side of the NetServer. See Figure 3-6.
NOTE
Save these thumbscrews. This same style of screw is used to
secure the new system board in the chassis.
3. Remove the two baffles as shown in Figures 3-5 and 3-6.
Figure 3-5. Remove Thumbscrews and Air Baffles from the
HP NetServer LH 3000 (pedestal version)
Removing Components from the LH 3000/3000r
17