HP D7171A - NetServer - LPr Upgrade Manual page 25

Chapter 4
5. Press the DIMM into the socket. The retaining clips close automatically if
it is inserted properly. See Figure 4-3.
CAUTION Do not rock the DIMM into place, but apply firm and even
pressure directly downward. If the retaining clips do not close,
remove the module and repeat Steps 3 through 5.
6. Add the second DIMM of the pair in the other bank of DIMM sockets.
7. Add other pairs of DIMMs as necessary.
Figure 4-3. Insert DIMMs in System Board
Installing LH 6000/6000r Components
After inserting one DIMM,
always insert the second
DIMM of the pair.
21