Install New System Board - HP D7171A - NetServer - LPr Upgrade Manual

Chapter 4

Install New System Board

When you have finished installing processors and DIMMs, you are ready to install
the new system board.
1. Carefully reinsert the system board assembly into its guides. See Figures
4-9 and 4-10 for the correct orientation.
2. Rotate the blue latches to the flat, locked position to seat the system board
securely in its socket.
3. Find the four thumbscrews shipped with this upgrade kit, and use them to
secure the system board assembly to the chassis.
Figure 4-9. Install New System Board in Pedestal Orientation
Installing LH 6000/6000r Components
27