HP D7171A - NetServer - LPr Upgrade Manual page 28

Chapter 4
1. Loosen the thumbscrew and open the access cover to processor slots 1, 2,
and 3.
Processor slots 1 and 2 are empty, and slot 3 contains a terminator.
Thumbscrew
Figure 4-6. Open Cover for Processor Slots 1, 2, and 3
2. Remove the processor to be added from the sealed bag.
3. Open the latches on top of the processor module and align it with one of
the open slots. In slots 1 and 2, the heat sink faces away from the system
board. See Figure 4-7.
24
Installing LH 6000/6000r Components
Cover for
Processor Slots
1, 2, and 3