HP StorageWorks 2/16 - SAN Switch Installation Manual page 57

Table 5: Front Panel LED Patterns During Normal Operation (Continued)
LED Location
Power Switch Below
LED Serial port
SAN Switch 2/16 Version 3.1.2 Installation Guide
LED Color
Display
No light
Steady green
Slow-flashing
green
Hardware
Status
Either the switch is Verify that the
off, or boot is not switch is on and
complete, or boot boot has had time
has failed. to complete. If
there is still no
light, contact the
switch supplier.
Switch is on and No action
boot has required.
successfully
completed.
Diagnostic failure Errors may be
on one or more listed in the error
ports. log. Refer to the
HP StorageWorks
Fabric OS
Version
3.1.x/4.1.x
Procedures Guide
for more
information.
Managing the SAN Switch 2/16
Recommended
Action
57