Electrostatic Discharge - HP StorageWorks 2/16 - SAN Switch Installation Manual

Electrostatic Discharge

To prevent damaging the system, be aware of the precautions you need to follow
when setting up the system or handling parts. A discharge of static electricity from
a finger or other conductor may damage system boards or other static-sensitive
devices. This type of damage may reduce the life expectancy of the device
To prevent electrostatic damage, observe the following precautions:
SAN Switch 2/16 Version 3.1.2 Installation Guide
Avoid hand contact by transporting and storing products in static-safe
containers.
Keep electrostatic-sensitive parts in their containers until they arrive at
static-free workstations.
Place parts on a grounded surface before removing them from their
containers.
Avoid touching pins, leads, or circuitry.
Always make sure you are properly grounded when touching a static-sensitive
component or assembly.
B
77