HP StorageWorks 2/16 - SAN Switch Installation Manual page 27

Installing the SAN Switch 2/16
Table 4: SAN Switch Rack Mount Kit rails and rail mounting hardware (Continued)
Item Description
(14) #8-32 x 3/16-inch Phillips pan-head
screw with thread lock for the SAN Switch
2/32
(14) 8-32 x 5/16-inch Phillips pan-head
SEMS screw for use with the SAN Switch
2/16.
Note: 8-32 x 5/16-inch Phillips pan-head
SEMS screw graphic is not available for this
release.
(10) #10-32 x 1/2-inch Phillips pan-head
screw with captive star lock washer
(8) #10 alignment washer
(8) #10 adapter washer
(2) 1/4-20 hex nut with captive star lock
washer
(2) 1/4-inch flat washer
SAN Switch 2/16 Version 3.1.2 Installation Guide 27