Received Data Dump - Kyocera TASKalfa 820 Operation Manual

Selecting the Printer Settings
3
Press [Yes].
Restart is executed.

Received Data Dump

You can print data received by the printer as hexadecimal code for
files.
1 Access Others, refer to Automatic Form Feed Timeout Setting on page 2-44.
2 Press [Print HEX-DUMP].
Printing mode with dump Rx data. Are
you sure? is displayed.
3
Press [Yes].
The message Processing data appears
for a second, followed by Waiting.
4
While the message display is indicating Waiting send data to be hex-dumped to the printer. The
message display indicates Processing data while the data is being received.
Note
You can cancel printing of any more dump data by pressing [GO] and then [CANCEL].
5 Once all data has been received, the message Waiting will appear. Press [GO] to finish hex-dump
printing.
2-48
Only printer board is working without turning off the
main SW. Are you sure?
Yes No
menu Setting mode
e Out 30 Seconds
ect Permanent
Off
Change #
Printing mode with dump Rx data.
Are you sure?
Yes No
Stop
debugging programs and
Close
Printer
Reset
Print
Service
HEX-DUMP
Stop