Using The Optional Hard Disk - Kyocera TASKalfa 820 Operation Manual

Important!
To activate RAM disk in the printer's memory, first you must set the RAM disk mode to On and set
the desired size for the RAM disk.
1 Access RAM DISK mode, refer to Activating the RAM Disk on page 2-34.
2
Press [RAM DISK Size].
3 Press [+] or [-] or use the numeric keys
to enter the RAM disk size.
4 Press [Close].
When memory size is changed, Do you want to restart immediately? is displayed.
5
Press [Yes].
The machine restarts and the RAM disk
size is changed.

Using the Optional Hard Disk

Installing the optional hard disk into the printer allows you to use all of the e-MPS function. To use
the e-MPS function, refer to e-MPS Function on page 2-37. This allows you to perform the following
operations on the hard disk.
•
•
•
•
•
Note
The operations of the hard disk are the same as those of the memory card. Refer to the relevant
sections Using the Memory Card on page 2-30.
Writing data
Printing a list of data names (partitions)
Reading data (Data and Program Data)
Deleting data (Data, Program Data, Font Data, and Macro Data)
Formatting a Hard Disk
Selecting the Printer Settings
RAM DISK Mode
Read
Write Data
Off
List of
On Partitions
RAM DISK
Size
Printer menu
RAM DISK Size
The memory size to use as RAM disk can be set.
16
MB
Printer menu - RAM DISK Mode
To make new setting effective, it is
necessary to restart the printer system.
Do you want to restart immediately?
Yes
Back
Delete
Back
No
2-35