Table of Contents
Advertisement
TN3270 Options
TN3270 Options
The
Options
button in the
TN3270 is not suppressed.
Connect
This specifies the name of the device which the server will be
requested to assign to the Telnet session. It may be used when
requesting either a terminal or a printer session.
You can return the local host name by entering %s after the device
name. To return the user name, enter %u after the device name. You
can specify how many characters of the name is returned in each
case. For example, %.3s will return the first three characters of the
local host name, and %-.3s will return the last three characters.
To automatically assign a new device name for each successive con-
nection, either enter %dN% after the name, where N is a decimal
value, or %xN%, where N is a hexadecimal value. Each time the
host requests the device name a counter will be substituted into the
device name. If the host rejects the device name as in use the counter
will be incremented modulus N and the name retried until all possi-
dialog is displayed by clicking the
TCP/IP Telnet Configuration
TCP/IP Connection Settings
Host Connection Settings
3270
dialog when
61
Advertisement
Table of Contents
