Neoware T5730 - Compaq Thin Client User Manual page 410

File Transfer
388 Receiving Files
6
If the kermit protocol is being used and the host kermit is in
remote mode, click the
fer
dialog, then the
to specify the file to be received, otherwise, click the
Initiate File Transfer
button in the
Note: The program waits for the arrival of one or more files
from the host.
Start
7
Click the button. If you selected the XMODEM, XMO-
DEM-1K or ASCII protocol, a dialog will be displayed in which
you specify the name of the file to be received. All the other pro-
tocols do not require this as the filename is provided by the
sender.
When the transfer begins, a window will be displayed indicating
the status of the file transfer.
On completion of the transfer, or if the transfer is cancelled
(refer to the next section), an audible tone will sound and appro-
priate messages will be displayed. (ASCII requires user inter-
vention and will continue to transfer data until you cancel it.)
Note: Once the file transfer is initiated you can minimize the
window to run it in the background.
Remote
button in the
Get Remote Operations
button in the
dialog.
Initiate File Trans-
dialog
Receive