Neoware T5730 - Compaq Thin Client User Manual page 45

ADDS A2
Provides compatibility with software designed to
drive the ADDS Viewpoint A2 terminal, as emu-
lated by the Wyse WY-50/50+/60 terminals. Refer
to the chapter "Wyse Emulations" on page 375 for
details.
AIXTerm
Provides compatibility with software designed to
drive an X terminal using X Windows.
ANSI BBS
This emulation is a derivative of the ANSI device
driver ANSI.SYS supplied with all DOS based PCs
and which provides the screen management for the
DOS console screen. PC based UNIX systems and
Bulletin Board Systems (BBS) often rely on the
ANSI emulation when being accessed by a PC. In
ANSI BBS mode the screen size is adjusted to 25
lines and the preferred character set is set to ANSI.
AT 386
Provides compatibility with software designed to
drive the AT&T AT 386 terminal.
ATT4410
Provides compatibility with software designed to
drive the AT&T Dataspeed 4410 terminal. Refer to
the chapter "AT&T 4410 Emulation" on page 261
for details.
BQ 3107
Provides compatibility with software designed to
drive the Bull BQ 3107 terminal. Refer to the chap-
ter "BQ 3107 Emulation" on page 265 for details.
DG 410/412
Provides compatibility with software designed to
drive the Data General D410 and D412 terminals.
Refer to the chapter "DG 410/412 Emulation" on
page 271 for details.
HP 700-92/96
Provides compatibility with software designed to
drive the Hewlett Packard 700/92, 2392A, 2622A,
70094 and 70096 terminals. Refer to the chapter
"HP 700-92/96 Emulation" on page 277 for details.
TeemTalk Connection Wizard Settings
Connection Information 23