Neoware T5730 - Compaq Thin Client User Manual page 144

Setup Menus
122 The File Menu
highlighted. Clicking on a defined session then the
cause TeemTalk to load that session configuration.
The session configuration that TeemTalk will load by default on
startup is indicated by a letter
default selection by selecting the required session description then
Save As Default
clicking the
Session templates created by the system administrator are indicated
T
by the letter after the session name. Refer to the section "Session
Management" on page 17 for details.
You can delete any session configurations except templates by
selecting the description then clicking the
the session deleted was a copy of a template (which will have the
same name), the template version will reappear in the
sions
list, as indicated by the letter
Close Session
This will close the current session.
Save Session
Selecting this option will save the current session configuration.
If you were using a session template and modified the settings, a
local copy of the template will be made with the same name, but
with the changed settings. This copy will replace the template in the
list of session configurations displayed in the
T
Note that the template indicator will no longer be displayed.
Save Session As...
This option is only available if TeemTalk was started without a ses-
sion (i.e. not started by clicking on a desktop icon or by selecting a
Start
session from the
you to save the current session configuration under a new name.
D
next to its name. You can change the
button.
Delete
T
.
menu). It will display a dialog that enables
OK
button will
button. Note that if
Defined Ses-
Open Session
dialog.