Ibm 5250 Emulation Settings - Neoware T5730 - Compaq Thin Client User Manual

IBM 5250
Emulation Settings
IBM 5250 Model
This option specifies what is reported back to the host in response to
a terminal identification request. (Note that not all features of the
specified terminal may be supported.) The terminal models and their
display characteristics are listed below:
Model
5291_1
5292_2
5251_11
3179_2
3196_A1
3180_2
3477_FC
3477_FG
3486_BA
3487_HA
3487_HC
5555_B01
5555_C01
The printer models are listed below:
3812-1
5553-B01
If double byte character sets (e.g. Japanese) are supported and you
wish to use them, then select either
5555_C01
(colour) for display, or
IBM 5250 Monochrome
The default setting of this option will match the normal display char-
acteristic of the selected IBM 5250 model. Note that all IBM 5250
models support both monochrome and colour display. When mono-
chrome is selected, characters will be displayed in green and intense
fields will be displayed in white. When monochrome is not selected,
the settings specified in the
tion "Attributes" on page 236) will be used for the display.
TeemTalk Connection Wizard Settings
Display Rows x Columns
Monochrome 24 x 80
Colour 24 x 80
Monochrome 24 x 80
Colour 24 x 80 (default)
Monochrome 24 x 80
Monochrome 24 x 80 and 27 x 132
Colour 24 x 80 and 27 x 132
Monochrome 24 x 80 and 27 x 132
Monochrome 24 x 80
Monochrome 24 x 80
Colour 24 x 80
Monochrome 24 x 80
Colour 24 x 80
Single byte printer
Double byte printer
5555_B01
5553-B01
Attributes
dialog (described in the sec-
Connection Information
(monochrome) or
for printing.
29