Serial Settings - Neoware T5730 - Compaq Thin Client User Manual

Serial Settings

This dialog is displayed by selecting
Configure...
by clicking the
when the connection type is set to
communications is specified in the
dialog.
Baud Rate
Factory default: 9600
This specifies the transmit and receive baud rates for the port
selected for host communications.
Parity
Factory default: None
This option specifies the parity mode for each transmitted character.
Data Bits
If the number of
Odd
Selecting will cause an eighth bit to be added with a value of 1
if the previous 7 bits add up to an even number, and 0 if the previous
7 bits add up to an odd number. Selecting
bit to be added with a value of 1 if the previous 7 bits add up to an
odd number, and 0 if the previous 7 bits add up to an even number.
Mark
parity will set every eighth bit to 1 and
to 0.
Serial
in the
New Connection
button in the
Serial
. Note that the port for serial
File New Connection
menu
8
is , set this option to
Even
Space
Serial Settings
Setup Menus
Settings
menu, or
dialog
None
.
will cause an eighth
parity every bit
209