Neoware T5730 - Compaq Thin Client User Manual page 163

TVI 910 TVI 920
, and
Provide compatibility with software designed to
drive the TeleVideo 910+, 920 and 925 terminals,
respectively, as emulated by the Wyse WY-50/50+/
60 terminals. Refer to the chapter "Wyse Emula-
tions" on page 375 for details.
TVI 950 TVI 955
and
Provide compatibility with software designed to
drive the TeleVideo 950 and 955 terminals, respec-
tively.
Unisys T27
Provides compatibility with software designed to
drive the Unisys T27 terminal. Refer to the chapter
"Unisys T27 Emulation" on page 365 for details.
Viewdata 40 Viewdata 80
,
These enable access to a viewdata service using one
of three display formats as described in the chapter
"Viewdata Emulation" on page 371.
VT PCTerm
Provides compatibility with software designed for
the PC Term mode supported by DEC.
VT52 VT100
and
These emulations enable you to run applications
written for the DEC VT52 and VT100 terminals,
respectively. Refer to the chapter "DEC VT Emula-
tions" on page 253 for details.
VT500 7-Bit VT500 8-Bit
and
These emulations enable you to run applications
written for the DEC VT320 terminal, the difference
is in their treatment of 8-bit control codes. When
VT500 7-Bit
verted to their 7-bit equivalents, whereas
Bit
leaves 8-bit codes unchanged. If you are using
VT200 applications, select
the chapter "DEC VT Emulations" on page 253 for
details.
TVI 925
Viewdata Split
and
is selected, all 8-bit codes are con-
Emulation Settings
Setup Menus
VT500 8-
VT500 7-Bit
. Refer to
141