Neoware T5730 - Compaq Thin Client User Manual page 306

HP 700-92/96 Emulation
284 Function Keys & Buttons
Remote mode and Local mode. The setting may be saved by select-
Save Session
ing in the
The emulation is in Local mode when the button does not display an
asterisk. Pressing alphanumeric keys will cause characters to be sent
to the display only.
When Remote mode is activated (as indicated by an asterisk), press-
ing alphanumeric keys will cause characters to be sent to the host.
Terminal Test - F5
When this button or F5 key is pressed, the HP 700-92/96 emulation
will perform a self-test and display a test screen showing all the dis-
playable characters.
Memory Lock - F6
This enables data to be locked on the display so that it is not scrolled
off the top of the window when display memory is full. Once
enabled, it can only be disabled if this button or F6 key is pressed
again, a reset is performed, or the emulation is exited.
Placing the cursor on the first line and enabling Memory Lock will
prevent data from automatically scrolling off the top of the display
when display memory is full. Instead, the message 'MEMORY
FULL Press RETURN to clear' will be displayed. You may use the
cursor keys to edit data already displayed. To disable the Memory
Lock and continue entering new data, press F6 or click the button
again and position the cursor immediately below the last line.
The Memory Lock function may also be used to lock a specific num-
ber of lines from the top of the display, leaving the remaining lines
to scroll past them. This is useful when you want column headings
or instructions to remain on the display. To lock a specific number of
lines, place the cursor on the last line to be locked and press F6 or
click the button. The lines from the top of the display down to the
cursor line will now be locked.
Note: You can edit data contained in locked lines but if new data is
inserted it may cause data on the last line of the locked region to be
pushed down into the scrolling region.
File
menu.