Table of Contents
Advertisement
IBM 3270 Emulation
Notice Board Facility
Introduction
Key Functions
Copying Screen
Data to the Display
312
Notice Board Facility
The Notice Board is an area of the display in which copied data can
be stored and manipulated.
When the Notice Board is enabled (refer to the section "Notice
Board Setup" on page 182), pressing the Zoom key will toggle the
display between full screen (i.e. the screen currently containing the
cursor) and split screen (host screen and Notice Board) mode. The
Zoom Settings
options in the
which screen is displayed above the other. When viewing the dis-
play, pointers at each end of the dividing line between the two
screens indicate which is the host screen.
The keys used by default for Notice Board functions are shown
below together with the equivalent virtual key names that can be
used to assign the functions to any key on the keyboard.
101/102 Key Keyboard
NB Setup: Alt + F2
Zoom:
Alt + Page Up
Jump:
Ctrl + Page Up
NB Copy: Ctrl + Shift + Page Up IB_NB_COPY
Copy:
Shift + Page Down
1
Position the text cursor at the start of the area to be copied.
2
Press the Copy key to start the Copy function. Note that the
status line will display the key functions available.
3
Use the cursor keys to move the text cursor to the diagonally-
opposite corner of the display area to be copied. The currently
selected area will be highlighted in green. Note that you can
toggle the position of the text cursor between the two
diagonally-opposite corners of the selected area by pressing the
Return key.
Notice Board Setup
Virtual Key Names
IB_NB_SETUP
IB_NB_ZOOM
IB_NB_JUMP
IB_COPY
dialog determine
Advertisement
Table of Contents
