Neoware T5730 - Compaq Thin Client User Manual page 38

Getting Started
16 The TeemTalk Window Display
will be inserted at the cursor position without deleting
existing characters, which will move to the right.
Item 7: This will display
Edit mode.
Item 8: This will display the time in 24 hour format when in DEC
VT500 mode if the VT525 set time command has been
received from the host.
Item 9: Indicates the status of the printer as follows:
None
signifies that the printer is not turned on or not con-
nected, or not installed in Microsoft Windows.
Not Ready
data for printing.
Ready
signifies that the printer is ready to receive data for
printing.
Auto
signifies that the emulation is in Auto Print mode in
which the current cursor line is sent to the printer when a
command for the cursor to move to the next line is issued.
Controller
troller mode in which the host has direct control over the
printer. Print screen commands issued from the keyboard
or mouse will be ignored.
ErrGen
indicates that an error has occurred and a message
box will be displayed indicating the error.
Item 10: This indicates the keyboard mode. It will be blank when
the keyboard is in normal mode and will display
in DEC mode. You can toggle between normal and DEC
mode by pressing the keys Alt + Num Lock together.
Item 11: Indicates the status of the aux port as follows:
Ready
indicates that the aux port is ready for bidirectional
output.
In Use
indicates that the aux port is currently busy.
Edit
when the terminal emulation is in
signifies that the printer is not ready to receive
signifies that the emulation is in Printer Con-
DEC
when