Table of Contents
Advertisement
Setup Menus
158
IBM 3151 Settings
lowing lines will move down the number of lines inserted, causing
the lines originally at the bottom of the display to be discarded.
Character
When set to
characters in the current line. Characters to the right of the cursor
position will move along. If the
characters originally at the end of the current line will be discarded.
Yes
If set to
, characters on all following lines will move along,
forcing characters at the end of the last line to be discarded.
Both
When set to
, the function of the
will be enabled.
Insert Character
Factory default: Space
The setting of this option determines the effect of pressing the
key.
Space
When set to
, a space character will be inserted after the
current cursor position.
Mode
When set to
, the emulation will enter Insert mode when the
Insert
key is pressed.
Auto Wrap
Factory default: Checked
The setting of this option determines what happens to the cursor and
data sent to the display when the end of the current line is reached.
When checked, the cursor will automatically move to the beginning
of the next line. Note that this will always be the case in block mode
or in a formatted page regardless of the setting of this option.
When unchecked, the cursor will remain at the end of the current
line and each new character sent to the display will overwrite the
character already occupying the cursor position.
, you will be able to insert one or more
Auto Wrap
Line
and
No
option is set to
, then
Character
settings
Insert
Advertisement
Table of Contents
