Editing Macros - Neoware T5730 - Compaq Thin Client User Manual

IBM 3270 Emulation

Editing Macros

310 Record & Playback Keystrokes Facility
If the recorded keystrokes included Pause, then playback will
halt at that point to allow you to enter keystrokes manually.
Press Play to resume playback from where you stopped typing.
If you want to cancel during the playback operation, press the
Quit key.
1
Press Alt + F3.
2
Press the Fn key containing the macro to be edited.
The status line will display information about the Fn key macro
as follows:
EDIT
Displays
•
Number of new keystrokes that may be stored.
•
Current Fn key number.
•
Cursor position within the macro (i.e. the number of key-
•
strokes from the start of the macro).
Contents of the macro.
•
3
Use the Left or Right cursor keys to move the cursor one char-
acter position at a time through the macro, or the Up or Down
cursor keys to move 20 character positions at a time.
4
If required, press the Insert key to toggle between Insert and
Edit mode, as indicated in the status line.
5 Make the required changes to the macro.
6 To save the edit, press Alt + F3.
7
Press Quit to exit.
INSERT
or depending on the current mode.